https://community.hpe.com/t5/proliant-servers-ml-dl-sl/embedded-video/m-p/2570134#M8257 The System Configuration Utility needs to be ran and disabling onboard video at the View and Edit screen=. Fri, 31 Aug 2001 23:00:00 GMT Ayman Altounji 2001-08-31T23:00:00Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/embedded-video/m-p/2570133#M8256 I've turned off the embedded controller with a switch 1 to "ON" but if still is on. I think. I reset everything with the maintenance switch. In config the embedded vga shows " PCI funtion 1 enabled vga resourcees disabled " the RADON PCI card(the new video card) shows " PCI funtion 1 enabled vga resourcees enabled " . When I boot to win2K vga It cones up but tries to install embedded video card. When I try to boot normal it locks after start screen. Any ideas? <BR />Larry Fri, 24 Aug 2001 23:00:00 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/embedded-video/m-p/2570133#M8256 Ayman Altounji 2001-08-24T23:00:00Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/embedded-video/m-p/2570134#M8257 The System Configuration Utility needs to be ran and disabling onboard video at the View and Edit screen=. Fri, 31 Aug 2001 23:00:00 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/embedded-video/m-p/2570134#M8257 Ayman Altounji 2001-08-31T23:00:00Z