https://community.hpe.com/t5/proliant-servers-ml-dl-sl/processor-board/m-p/2571650#M8317 There are some jumpers on the processor board, anyone know where any documentation as to what these jumpers do is? <BR />My problem is, I can F9 into diagnostics, but F10 does nothing and I need to change the config to boot from a cd. Tue, 28 Aug 2001 23:00:00 GMT Ayman Altounji 2001-08-28T23:00:00Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/processor-board/m-p/2571650#M8317 There are some jumpers on the processor board, anyone know where any documentation as to what these jumpers do is? <BR />My problem is, I can F9 into diagnostics, but F10 does nothing and I need to change the config to boot from a cd. Tue, 28 Aug 2001 23:00:00 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/processor-board/m-p/2571650#M8317 Ayman Altounji 2001-08-28T23:00:00Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/processor-board/m-p/2571651#M8318 Here is a page that has setting info. <BR /><A href="http://www.compaq.com/support/techpubs/qrg/proliant1500r.html" target="_blank">http://www.compaq.com/support/techpubs/qrg/proliant1500r.html</A> Thu, 13 Sep 2001 23:00:00 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/processor-board/m-p/2571651#M8318 Ayman Altounji 2001-09-13T23:00:00Z