https://community.hpe.com/t5/proliant-servers-ml-dl-sl/hardisk-replacement-issues-on-dl360-g4-server/m-p/4329201#M86655 I have an HP Proliant DL360 G4 server. One of the 2 Hard disk was indicating a problem by flashing red. I first tried removing it and the replacing it back into the drive bay. I got no improvement. I then got an identical, though brand new one for a replacement. Since then, the Server will NOT boot.The Red flash on the disk has disappeared though; but it continues to reboot not seeing the operating system. Anyone to assist? Sun, 28 Dec 2008 22:48:04 GMT Yandi 2008-12-28T22:48:04Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/hardisk-replacement-issues-on-dl360-g4-server/m-p/4329201#M86655 I have an HP Proliant DL360 G4 server. One of the 2 Hard disk was indicating a problem by flashing red. I first tried removing it and the replacing it back into the drive bay. I got no improvement. I then got an identical, though brand new one for a replacement. Since then, the Server will NOT boot.The Red flash on the disk has disappeared though; but it continues to reboot not seeing the operating system. Anyone to assist? Sun, 28 Dec 2008 22:48:04 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/hardisk-replacement-issues-on-dl360-g4-server/m-p/4329201#M86655 Yandi 2008-12-28T22:48:04Z https://community.hpe.com/t5/proliant-servers-ml-dl-sl/hardisk-replacement-issues-on-dl360-g4-server/m-p/4329202#M86656 Not sure if you tried deselecting "System Failure" option to "Automatically restart."?<BR /><BR />Reboot the server in safe mode and try the above to deselect Automatically restart on system failure option. Tue, 30 Dec 2008 05:33:12 GMT https://community.hpe.com/t5/proliant-servers-ml-dl-sl/hardisk-replacement-issues-on-dl360-g4-server/m-p/4329202#M86656 Srikanth Puliventla 2008-12-30T05:33:12Z