topic Re: DL360 G4 will not boot in ProLiant Servers (ML,DL,SL)

DL360 G4 will not boot

Jason Martin — Fri, 02 Jan 2009 04:03:19 GMT

I have 4 DL360 G4 that were working fine that all of a suddent all stopped working. When I plug the power in the fans start up and the hard drives power on. I see the keyboard ligths flash. But nothing comes on the monitor.

Also, the only LEDs that appear int he inside are on the system diagnotic sections and cr22 & cr28 both stay on steady.

Any help appreciated.

Re: DL360 G4 will not boot

KarloChacon — Fri, 02 Jan 2009 08:48:42 GMT

all 4 same symptom ???

no video and same LEDs mmm pretty weird

you should really call support

the point ok if they don't have video maybe you are using an ip console switch - TFT and one if not working but also LED behavior

try normal clear CMOS
reseat parts
try minimum configuration - 1 Proc - 2 DIMMS - no PCI cards

Re: DL360 G4 will not boot

Jason Martin — Sat, 03 Jan 2009 16:18:31 GMT

How can I tell if it is set to "ip console switch - TFT" without a monitor working?

Re: DL360 G4 will not boot

KarloChacon — Sat, 03 Jan 2009 16:21:17 GMT

since you ask that I assume you don't that infrastructure deployed in your lab, just follow the other stuff I said

Re: DL360 G4 will not boot

Jason Martin — Sat, 03 Jan 2009 18:13:20 GMT

I tried going to iLO through rhe web and it comes up. If I try remote console from there it says:

"Monitored Server Console is in an unsupported text mode"

Any ideas?

Re: DL360 G4 will not boot

Don Leitch — Mon, 05 Jan 2009 11:55:15 GMT

I agree with Karlo.

Suggest you go to minimum config to see if this cures your problem.

I would suggest you have a processor or system board issue