topic Rack issues in ProLiant Servers (ML,DL,SL)

Rack issues

Mario N. — Mon, 23 Mar 2009 10:53:30 GMT

I need to plan the deployment of 3 DL servers plus a MSA disk library plus 2 UPS and some other components in a rack.
Where can I locate a document explaining:
- how servers must be placed inside the rack
- how many units (if any) must be left unused between servers and between servers and other components
- how can I calculate the weight of the rack over the floor
- what additional issues I must consider while planning the purchase of the rack
Regards
Marius

Re: Rack issues

Ken Henault — Mon, 23 Mar 2009 11:55:58 GMT

You want to place the heaviest items in the bottom of the rack to ensure stability, in this case that would be the UPS. You do not need to leave any space between components, a rack is designed to be filled bottom to top. The configurator at http://www.hp.com/products/configurator will let you build your rack and get specifications like weight, rack-Us and recomended racking positions.

Re: Rack issues

Mario N. — Mon, 23 Mar 2009 12:59:12 GMT

Thanks for the pointer. It is really useful, even if some options are still obscure.
Can anyb ody provide pointers to documentation useful to understand the configuration rules?
Regards
Mario

Re: Rack issues

juan quesada — Tue, 24 Mar 2009 15:04:44 GMT

I guess that you are looking for the rack guidelines o rack best practices, check this pdf

ftp://ftp.compaq.com/pub/products/servers/proliantstorage/racks/Best-Practice.pdf

Re: Rack issues

Shiraj Fernando — Wed, 25 Mar 2009 04:35:48 GMT

Hi,

You may also find the attached Generic Site Prep guide from HP to be useful.

Regards,
Shiraj.