topic Re: Miniport drivers too old - DL360 G5 in ProLiant Servers (ML,DL,SL)

Miniport drivers too old - DL360 G5

Steve Brereton — Tue, 12 May 2009 11:59:30 GMT

I'm setting up a new, just out of the box DL360, have flashed the firmware, but when I launch the NCU to set up teaming, get the message:

Verions of miniport drivers not compatible with the NCU installed. Please install new driver -

NC373I MF Gb BXND60X.SYS 4.5.4.0 - needs to be 4.8.4.0 or higher.

Running Win wk8, but I cannot find a newer driver than 4.5.4 anywhere.

The NCU is the one from SS 8.2

Re: Miniport drivers too old - DL360 G5

Cederberg — Tue, 12 May 2009 13:12:06 GMT

Hmm thats wierd try to reinstall the PSP 8.20 Network driver again.. sounds like it uses a windows driver...

if that doesn't work delete and rescan in device manager...

Re: Miniport drivers too old - DL360 G5

Steve Brereton — Tue, 12 May 2009 13:48:11 GMT

Thanks.
Done that
CP009704 - HP NC series Broadcom 1Gb Multifunction Driver W2k8, 4.4.24.0

is the one I used, but that is clearly not 4.8.4 or above, nor is it 4.5.4 that NCU thinks it is looking at
This is the problem that I have. If I'm looming the wrong place or for the wrong thing, I'd love to know! Is this, for instance, the Miniport driver?

Re: Miniport drivers too old - DL360 G5

Pieter 't Hart — Wed, 13 May 2009 08:26:50 GMT

when i look at
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15351&prodSeriesId=1121486&swItem=MTX-88a246d84e9441e4b7157a2bca&prodNameId=3288144&swEnvOID=4022&swLang=8&taskId=135&mode=5
version has passed 9.x some time ago ?
(both win2k8-32/64)

Re: Miniport drivers too old - DL360 G5

Steve Brereton — Wed, 13 May 2009 09:08:13 GMT

Ah! That's the right one. Don't know where you found it, but once I'd updated NCU and the driver package, its all fine. Thanks!