topic ml 330 g3 in ProLiant Servers (ML,DL,SL)

ml 330 g3

augie — Sun, 16 Aug 2009 13:26:08 GMT

the server shuts dowm after a few hours. the server will only boot if i clear any data from the memory by pressing the power butting with out the power cable for 5 seconds. then it will run again for couple of hours. can suggestions?? thanks!

Re: ml 330 g3

Gokul Chandola — Sun, 16 Aug 2009 14:00:27 GMT

HI,

There may be several problems, so you have to use HP Dignostic tool.

There may several problems like Power supply, motherboard etc.

If you nothing found in HP Dignostics then this is problem with POWER SUPPLY.

Regards,
Gokul Chandola

Re: ml 330 g3

augie — Sun, 16 Aug 2009 23:07:29 GMT

i already replaced the power supply and tried removing all devices before booting and i get the same problem. i also think it might be the motherboard. thank you

Re: ml 330 g3

Michal Kapalka (mikap) — Mon, 17 Aug 2009 07:57:03 GMT

hi,

what kind of OS is running on the machine ??

Windows => event log ....

Linux = Sylog / messages ...

mikap

Re: ml 330 g3

augie — Mon, 17 Aug 2009 09:49:00 GMT

win OS is win2003
no error's on the viewer. thanks

Re: ml 330 g3

Mon, 17 Aug 2009 10:06:42 GMT

Hello,

Have you been able to run the HPS tool. Also have you cleared the NVram? Has the server been run in minimal config? Are all FW/Drivers up to date? If you want me to I can have a look at the HPS report for you/provide the tool. Feel free to email me at joakim@hp.com

Re: ml 330 g3

Mon, 17 Aug 2009 10:22:02 GMT

FW CD:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3279701&prodTypeId=15351&prodSeriesId=316573&swLang=8&taskId=135&swEnvOID=1005#2913