topic Re: ML370 G4 Memory upgrade in ProLiant Servers (ML,DL,SL)

ML370 G4 Memory upgrade

Karl Whitson — Wed, 23 Sep 2009 20:25:26 GMT

I have just attempted to upgrade my memory in my ML370 G4 server and the server will not boot. It just has a loud and long beep, silence for a few seconds and then long and loud beep again. I repleaced 8 GB of PC2-3200R DDR2-400 Registered ECC (8 x 1GB) with 16 GB of PC2-5300 DDR2-667 Registered ECC(8 x 2GB). I just found a document that looks like PC2-3200 may be the highest supported on this server. Is that the case? Is there anything I can do with this memory to use in this server?

Re: ML370 G4 Memory upgrade

Antonio de Martino — Wed, 03 Feb 2010 09:45:05 GMT

Hello there,
according to the official Hp quickspecs for server ML370G4 PC-5300 memory module are not allowed to install.

Memory
One of the following depending on Model - Type Single-ranked 2-way interleaved PC2-3200R running at 400MHz

Memory:
Maximum 16 GB of 2-way interleaved PC2-3200R 400MHz DDR2 memory with Advanced ECC capabilities;

http://h18004.www1.hp.com/products/quickspecs/12029_div/12029_div.HTML

This are the only memory module installable:

Memory

1 GB of Advanced PC2 PC3200R DDR2 SDRAM DIMM Memory Kit (2 x 512 MB)
343055-B21
2 GB of Advanced PC2 PC3200R DDR2 SDRAM DIMM Memory Kit (2 x 1024 MB)
343056-B21
4 GB of Single-Ranked PC2 PC3200R DDR2 SDRAM DIMM Memory Kit (2 x 2048 MB)
343057-B21
NOTE: The HP ProLiant ML370 G4 does not support dual ranked memory.

Re: ML370 G4 Memory upgrade

Fletcjas — Mon, 29 Apr 2013 13:35:33 GMT

I have just removed the RAM, cleaned the inside and replaced all as before, and i am now having this problem.. It has the exact same h/w but still same problem as above- thanks