topic Re: Smart Array E200 in ProLiant Servers (ML,DL,SL)

Smart Array E200

Kyle Hawthorne — Wed, 21 Oct 2009 14:20:08 GMT

I need to replace the Smart Array E200 card in my Proliant DL180 G5 server. After I replace the card, is there any configuration required or will it work just like the old did? If there is some configuration required, how do I do it? Please let me know.

Re: Smart Array E200

Shayne Heidemann — Thu, 22 Oct 2009 03:23:42 GMT

SmartArray store the configuration on a small are of each hard drive in the array, just replacing the card should not cause this to be lost.

Re: Smart Array E200

Kyle Hawthorne — Thu, 22 Oct 2009 14:36:51 GMT

I will be replacing the card on Friday afternoon. If I am "a happy camper" after the installation, then I will award points on Monday.

Re: Smart Array E200

TTr — Thu, 22 Oct 2009 16:57:10 GMT

What Shayne said is correct. You can replace the E200 with another E200 or any of the HP SAS based SA array controllers and it will find the array configuration on the disks and bind them into arrays as they were before.

As always have a good backup before doing any array/disk work for just in case.

> If I am "a happy camper" after...

Don't shoot the messenger if something goes wrong.

Re: Smart Array E200

Kyle Hawthorne — Thu, 22 Oct 2009 17:01:42 GMT

I appreciate the help. I just did not want to award points until the job was done.

Re: Smart Array E200

HowardA — Tue, 18 Jun 2013 13:26:07 GMT

This sounds like good news.

I have to replace a failed Smart Array e200 controller which has taken a four-year old server running Microsoft Small Business Server 2003 offline. I'm currently waiting for the replacement e200 controller to arrive. The client runs a busy office and I'm very much hoping that the replacement of the failed e200 will get them back on line quickly.

The 'HP Smart Array E200 Controller User Guide' emphasizes the importance of updating firmware and drivers but does NOT mention that array configuration data is stored on the disks and does not have to be re-created. As I have all the disks mirrored I was very worried about misconfiguring the array and losing data. It is all backed up, but the time that would take would be a problem.

Thanks for this information.

Howard A

Re: Smart Array E200

Jimmy Vance — Tue, 18 Jun 2013 16:29:39 GMT

The array configuration is stored on the disks. The only issue you could encounter is the firmware on the replacement controller being older than what was on the failed controller. In this case you would just need to update the controller firmware