topic Re: ML110 - How to enable ATA in BIOS in ProLiant Servers (ML,DL,SL)

ML110 - How to enable ATA in BIOS

Gilsur — Mon, 30 Nov 2009 06:32:06 GMT

Hi,

I have an HP ML100 with SCSI disk installed. then, i was planning to install this server with mikrotik routerOS. So, i bought an HDD and connected it to ATA slots that available in motherboard. (RouterOS doesnt support SCSI disk.). But, in BIOS, i just found that ATA serial is disabled, but i couldnt enable it.

What should i do?

thanks alot.

Re: ML110 - How to enable ATA in BIOS

TTr — Mon, 30 Nov 2009 13:29:07 GMT

You did not mention which G the ML110 is but normally you get in the RBSU by hitting the F10 key when during boot up. Then go to the advanced bios screen to see and enable the SATA controller, select boot priority etc..

Re: ML110 - How to enable ATA in BIOS

Gilsur — Tue, 01 Dec 2009 02:28:06 GMT

My Proliant is ML110 (without G). I've entered advanced mode in BIOS, and could see my ATA controller menu was disabled and inactive. I have no idea how to enable it.

Re: ML110 - How to enable ATA in BIOS

TTr — Tue, 01 Dec 2009 03:19:00 GMT

> and could see my ATA controller menu was disabled and inactive

You mean you have not navigated in the BIOS settings before? You could not highlight the "disabled" and toggle it to "enabled"?

Re: ML110 - How to enable ATA in BIOS

Gilsur — Tue, 01 Dec 2009 06:25:48 GMT

yup, thats what i mean. ATA configuration was highlighted in gray. I couldnt move my pointer there to change the value.