topic Re: automating disabling ASR? in ProLiant Servers (ML,DL,SL)

automating disabling ASR?

davidc_2 — Thu, 14 Jan 2010 21:25:10 GMT

Hello,
My company uses several Proliant DL model servers... 320, 360, 380, 180, g1, g2, g3, g4, g5, g6, etc... quite a few different ones.

I'm trying to find out if there is a way to automate disabling the ASR feature as part of our deployment process for Windows servers..

I would need to be able to do it from a script.

1. I'm assuming there is no registry setting since this is an out-of-band from the OS kind of thing, yes/no?

2. is there a command line tool I could shell out to?

3. Could it be done via WMI?

any input would be appreciated, thanks.

Re: automating disabling ASR?

marcus1234 — Thu, 14 Jan 2010 21:34:53 GMT

in os if it is windows based ASR can be disabled

my comp .props .advanced .startup and recovery settings autorestart remove the tick

Re: automating disabling ASR?

davidc_2 — Thu, 14 Jan 2010 21:43:43 GMT

Hi Mark1234, thanks for the reply.

my comp -> props -> advanced system settings -> start up and recovery 'settings' button -> in 'system failure' section, untick 'automatically restart'?

That's a hook into the HP ASR feature? I thought that was just part of Windows? Isn't HP ASR part of ILO stuff, operating outside of the installed operating system?

I just unticked it and re-ran the System Management Homepage and ASR is still enabled.

??

Re: automating disabling ASR?

marcus1234 — Fri, 15 Jan 2010 18:56:03 GMT

did you try restart the server then check the home page

Re: automating disabling ASR?

davidc_2 — Fri, 15 Jan 2010 19:16:28 GMT

yes, I restarted. System Management Homepage still shows ASR as enabled. The setting you are referring to is there whether Windows is installed on HP hardware, Dell, anything, it's an operating system feature, what I'm referring to is an HP feature.

anyone know?

Re: automating disabling ASR?

ab_server — Sun, 17 Jan 2010 04:07:33 GMT

Have you already tried modified modifying (disabling ASR ) at your server BIOS ?
(At SERVER AVAILABILITY, ASR STATUS)

Re: automating disabling ASR?

radek zima_1 — Sun, 17 Jan 2010 15:45:33 GMT

Hi, you can use SSST (smart start scripting toolkit), the correct XML file for disabling ASR (guess you mean the HP stuff: "Automatic Server Recovery", not the Windows stuff for restoring) is this:

Disabled

The utility that can be used to use this xml file is called "conrep", it exists either as Windows, DOS, or Linux binary ...

Radek

Re: automating disabling ASR?

davidc_2 — Mon, 18 Jan 2010 16:35:15 GMT

re: BIOS: I need a way to automate this change so the BIOS route won't work. Also, I was under the impression that this setting is not necessarily accessible/changable from the BIOS in all models?

Radek Zima:
That sounds interested, I'm not familiar with SSST. Is this something that needs to be a part of the Proliant Support Pack installation, or can it be done after PSP installation? More info would be very much appreciated. As I said, I'm not familiar with SSST at all, but it sounds like I should be. Will this work for all server models or only some?

Re: automating disabling ASR?

radek zima_1 — Mon, 18 Jan 2010 17:11:14 GMT

Hi David,

here is the product homepage with documentation:

http://h18000.www1.hp.com/products/servers/management/toolkit/index.html

It is not connected to PSP, it's a separate product, I'm using this with PXE and it works on all "real" ProLiant servers (ML300/DL300 and above) ... Radek

Re: automating disabling ASR?

davidc_2 — Mon, 18 Jan 2010 17:26:37 GMT

Radek Zima,
thanks again for the reply. I was just reading up a bit on the SSST. I downloaded the win64 version and was looking into the sample files. I have a quick follow up question that if you know could save me a bunch of time.

I already have an established server deployment system (MDT 2010). I'm thinking I should be able to just use parts of the SSST to enhance my existing system by getting at those BIOS level settings. Using MDT I have the ability to launch any script I want from WinPE or the fully installed Windows OS, so I should be able to, for example, just set this HP ASR setting if I wanted, right? If so, could you let me know which parts I should look into to do this? I could use this ASR setting as my proof of concept to start integrating some of the SSST tools into my overall deployment system.

thanks again!

Re: automating disabling ASR?

davidc_2 — Mon, 18 Jan 2010 17:29:19 GMT

Radek Zima,
Hey, I just re-read your last post and I see you have already told me which specific part to use for ASR, awesome, thank you. So to wrap up I just need to know if I will be able to just do that one setting with SSST, without needing to use the whole SSST deployment process, since I am already using a different process.

thanks again.

Re: automating disabling ASR?

radek zima_1 — Mon, 18 Jan 2010 18:08:24 GMT

Hi, yep, you can just start one batch containing single "conrep" command ... it should run without issues in WinPE (that's actually the procedure that HP is using in RDP product anyway)...Radek

Re: automating disabling ASR?

davidc_2 — Tue, 19 Jan 2010 22:29:35 GMT

oops.. found my spelling mistake in the xml file. It runs now but I get errors

dpioctl 467156 last error was: 6
dpioctl 467152 last error was: 6
dpioctl 467156 last error was: 6
dpioctl 467152 last error was: 6
dpioctl 467156 last error was: 6
dpioctl 467152 last error was: 6
dpioctl 467156 last error was: 6
dpioctl 467152 last error was: 6
and so on...

had to ctrl-c to quit, then gave return code of 2, bad data file?

anyone know what I'm doing wrong here?

Re: automating disabling ASR?

radek zima_1 — Tue, 19 Jan 2010 22:33:04 GMT

ad 1)
You can add the version, something like this:

Disabled

ad 2) no idea about your error messages, what box are you trying that on? from which version of Win PE?

Re: automating disabling ASR?

davidc_2 — Tue, 19 Jan 2010 22:43:33 GMT

Hi, thanks for responding again, I appreciate it.

Actually I was running it from windows server 2008. I thought it was able to run from WinPE or the full installed Windows OS. No?

my test machine is a DL360 G4, currently has server 2008 R2 on it. I did not install Proliant Support Pack on this. I know you can't do everything with conrep without the health driver (IPMI driver), but as my first test I just tried to run the conrep command before installing the PSP.

my command was:
conrep -l -x c:\test.xml

Re: automating disabling ASR?

radek zima_1 — Tue, 19 Jan 2010 22:51:45 GMT

Hi David, I just tried on one of my Windows 2008 with PSP and got the same issue ... I'm using it only from WinPE booted over PXE, I will try to look for solution, but not sure at the moment ... R.

Re: automating disabling ASR?

davidc_2 — Tue, 19 Jan 2010 22:58:15 GMT

Hi Radek,
Ok, thanks for that, I won't bother installing PSP to see if it makes a difference then. I will actually be doing this from WinPE as my final solution, I was just trying to do a little playing with it in 2k8.

I'll try from WinPE now.
1. Do I only need the conrep.exe and the settings xml file?

2. I have both x86 and x64 versions of WinPE in use, do you know if I can just use the x86 version of conrep.exe for both? or do I need to get the seperate 32 and 64 bit versions for each respective WinPE version?

thanks again!.

Re: automating disabling ASR?

radek zima_1 — Tue, 19 Jan 2010 23:05:54 GMT

Hi David,

1) you need also libxml2.dll

2) you should use 32-bit toolkit in 32-bit winpe and 64bit in 64bit ... guest 32bit will work even in 64bit, but as it's a bit of pain to put these to WinPE, I will put there both to stay save ...

3) you will also need hpsstkio.sys from hpDrivers directory (if you unpack toolkit distribution file) in \system32 (may this be the issue with dpioctl?) ... I'm afraid you should be carefull here with 32/64bit ...

Radek

Re: automating disabling ASR?

davidc_2 — Tue, 19 Jan 2010 23:31:47 GMT

ahhh. Thanks very much Radek.

So I'm assuming I need to actually add the hpsstkio.sys driver file to my PE image and have it loaded before trying to run conrep? In other words, I can't just copy the file over the network into the PE windows\system32 directory and expect conrep to load it when it needs it? I use MDT and WAIK which pretty much takes care of adding drivers for me, so I have not had to manually mess with it at all. To do that though, I would need an accompanying inf file, which I don't see for hpsstkio.sys, I assume I can't just copy this file into system32 of my pe image offline, then boot and have it work, right? I would need to tell PE to actually load this driver somehow, right?

I think your right on my error being due to no hpsstkio.sys. I just ran it from PE by booting an existing PE image and just copying over conrep.exe... it gave me an error saying it needed libxml2.dll, as you also said, so I copied that file to the same directory as conrep.exe and tried again, this time, same error I was getting from 2008, dwIOCTL

Re: automating disabling ASR?

davidc_2 — Tue, 19 Jan 2010 23:53:44 GMT

just found and read the readme file from the HPdrivers directory.. no inf for hpsstkio.sys, just says to copy to the system32 directory.

so if I only need to use conrep.exe should I be able to copy just conrep.exe, libxml2.dll, and hpsstkio.sys to the appropriate places in my PE image and use? No editing init files anywhere to actually load the hpsstkio.sys file?

I have to head home now, but I will try this in the morning. If I have to load the whole SSSTK PE package as detailed in that readme file that's what I will do, but considering I only need this for one setting, I'm trying to just do the simplest thing to accomplish just that. Thanks again for all your help, I do appreciate it.