topic Re: Problem with seeing files when attempting 2008 R2 install via usb or network share in ProLiant Servers (ML,DL,SL)

Problem with seeing files when attempting 2008 R2 install via usb or network share

DelCorEd — Fri, 15 Jan 2010 20:07:15 GMT

Here is the issue

I am attempting to install from network share or USB key using smartstart 8.30. Installing Windows 2008 Standard R2 using both iso or flat file is failing. The problem is I can see the windows 2008 installation folder structure from within smartstart in both the iso and flat file sources used, but not any individual files. All folders are empty. In the case of network share the address is \mount, in the case of the USB drive the address is \mount\usb0. I cannot seem to modify this path manually either. Am I missing something?
Installation with DVD media works fine.

Re: Problem with seeing files when attempting 2008 R2 install via usb or network share

marcus1234 — Fri, 15 Jan 2010 22:45:14 GMT

hmmm R2" is not really supported by smart start cd,,

install os then psp pack from smart start cd after

This is how we thank each other in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33

Enjoy:)

Re: Problem with seeing files when attempting 2008 R2 install via usb or network share

DelCorEd — Fri, 15 Jan 2010 23:15:34 GMT

Is it not really supported in SmartStart 8.30? Windows 2008 standard and enterprise R2 are present in the OS menu when starting installation from the SmartSTart CD and the OS installs fine when selecting DVD format as the source rather than USB or network share.

Re: Problem with seeing files when attempting 2008 R2 install via usb or network share

katie1 — Sat, 16 Jan 2010 01:13:12 GMT

which server and generation model i need to check

Re: Problem with seeing files when attempting 2008 R2 install via usb or network share

katie1 — Sat, 16 Jan 2010 01:14:00 GMT

as we have one we will be setting up too

Re: Problem with seeing files when attempting 2008 R2 install via usb or network share

DelCorEd — Tue, 19 Jan 2010 11:31:37 GMT

We are installing ML350 G6 series.

Re: Problem with seeing files when attempting 2008 R2 install via usb or network share

marcus1234 — Thu, 21 Jan 2010 21:37:19 GMT

hmm delcored look at this page no smart start cd for this server...it does not support it..

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3884316&prodTypeId=15351&prodSeriesId=3884315&swLang=13&taskId=135&swEnvOID=4064

no smart start cd to setup this server
boot from microsoft cd install OS then after install the proliant software pack

as R2" is not supported with this from smart start cd.

This is how we thank each other in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33

Enjoy:)

Re: Problem with seeing files when attempting 2008 R2 install via usb or network share

DelCorEd — Fri, 22 Jan 2010 00:24:11 GMT

Ok, This thread gives me some clues.
http://forums11.itrc.hp.com/service/forums/questionanswer.do?admit=109447626+1264119365634+28353475&threadId=1207183

It's obvious that smartstart v8.30 CD claims to support Windows 2008 R2, but apparently there are a LOT of glitches when trying to install looking at the number of recent complaints (even with using the DVD method). The last entry indicates that HP will be fixing things in the next version of SmartStart 8.x or 9 or 10, etc, etc. I will wait until then to see what HP does and just continue with DVD media only. Too bad, using a network install when installing several servers would be VERY nice.

Re: Problem with seeing files when attempting 2008 R2 install via usb or network share

marcus1234 — Fri, 22 Jan 2010 15:01:37 GMT

nice to see you sorted delcored

This is how we thank each other in the forum

http://forums11.itrc.hp.com/service/forums/helptips.do?#33

Enjoy:)