topic Transformation Priority? in HPE ProLiant Storage Systems https://community.hpe.com/t5/hpe-proliant-storage-systems/transformation-priority/m-p/6870495#M3027 <P>I'm using P420i raid card. When I setup the raid, the Transformation Priority always default is LOW. But I want change it to medium or high. Where I can change it?<!-- BEGIN_SINGLE_CSS_INCLUDE --><!-- END_SINGLE_CSS_INCLUDE --></P><P>Note: In raid setup GUI don't have this option&nbsp;</P><DIV><DIV><DIV><DIV><DIV><DIV><DIV><DIV><DIV><DIV><SPAN>Smart Array P420i </SPAN></DIV></DIV></DIV></DIV></DIV></DIV></DIV></DIV></DIV></DIV><P><!-- BEGIN_SINGLE_CSS_INCLUDE --><!-- END_SINGLE_CSS_INCLUDE --></P><DIV><DIV><DIV><DIV><DIV><DIV><DIV><DIV><DIV><DIV><SPAN>Smart Array P420i </SPAN></DIV></DIV></DIV></DIV></DIV></DIV></DIV></DIV></DIV></DIV> Sun, 19 Jun 2016 08:17:27 GMT TuanPhat 2016-06-19T08:17:27Z Transformation Priority? https://community.hpe.com/t5/hpe-proliant-storage-systems/transformation-priority/m-p/6870495#M3027 <P>I'm using P420i raid card. When I setup the raid, the Transformation Priority always default is LOW. But I want change it to medium or high. Where I can change it?<!-- BEGIN_SINGLE_CSS_INCLUDE --><!-- END_SINGLE_CSS_INCLUDE --></P><P>Note: In raid setup GUI don't have this option&nbsp;</P><DIV><DIV><DIV><DIV><DIV><DIV><DIV><DIV><DIV><DIV><SPAN>Smart Array P420i </SPAN></DIV></DIV></DIV></DIV></DIV></DIV></DIV></DIV></DIV></DIV><P><!-- BEGIN_SINGLE_CSS_INCLUDE --><!-- END_SINGLE_CSS_INCLUDE --></P><DIV><DIV><DIV><DIV><DIV><DIV><DIV><DIV><DIV><DIV><SPAN>Smart Array P420i </SPAN></DIV></DIV></DIV></DIV></DIV></DIV></DIV></DIV></DIV></DIV> Sun, 19 Jun 2016 08:17:27 GMT https://community.hpe.com/t5/hpe-proliant-storage-systems/transformation-priority/m-p/6870495#M3027 TuanPhat 2016-06-19T08:17:27Z Re: Transformation Priority? https://community.hpe.com/t5/hpe-proliant-storage-systems/transformation-priority/m-p/6967664#M3147 <P>Download and install the latest ACU (HP Array Configuration Utility). From the ACU go to the 'Configuration' tab and click on the controller (HP Smart Array&nbsp;<SPAN>P420i). On the right hand side of the browser, click on the 'Controller Settings' button and you will see the Transformation Priority.</SPAN></P> Fri, 09 Jun 2017 20:47:08 GMT https://community.hpe.com/t5/hpe-proliant-storage-systems/transformation-priority/m-p/6967664#M3147 T1Cowboy 2017-06-09T20:47:08Z