https://community.hpe.com/t5/switches-hubs-and-modems/pcm-authentication-with-switches/m-p/3945333#M10451 Hi does any one know how can PCM automaticaly authenticate with a switch when trying to access it trough LiveView in PCM? Thanks Thu, 15 Feb 2007 09:25:10 GMT Alessio Zarb 2007-02-15T09:25:10Z https://community.hpe.com/t5/switches-hubs-and-modems/pcm-authentication-with-switches/m-p/3945333#M10451 Hi does any one know how can PCM automaticaly authenticate with a switch when trying to access it trough LiveView in PCM? Thanks Thu, 15 Feb 2007 09:25:10 GMT https://community.hpe.com/t5/switches-hubs-and-modems/pcm-authentication-with-switches/m-p/3945333#M10451 Alessio Zarb 2007-02-15T09:25:10Z https://community.hpe.com/t5/switches-hubs-and-modems/pcm-authentication-with-switches/m-p/3945334#M10452 Hi<BR /><BR />Usually if you have setup an Operator password, then you can't see the Live View unless you enter this Operator password in the PCM.<BR />Also if you have a Manager password, you can;t do any configuration push or modify anything until you enter this password in the PCM.<BR /><BR />In the menu, tools, preferences, device access , CLI , enter both Manager and operator password there<BR /><BR />Good Luck !!! Thu, 15 Feb 2007 11:18:23 GMT https://community.hpe.com/t5/switches-hubs-and-modems/pcm-authentication-with-switches/m-p/3945334#M10452 Mohieddin Kharnoub 2007-02-15T11:18:23Z https://community.hpe.com/t5/switches-hubs-and-modems/pcm-authentication-with-switches/m-p/3945335#M10453 I have allready entered the requierd passwords but still when when i press the live view a login window appeasers.is there a way u can enter the live view without entering a password?<BR /> Thu, 15 Feb 2007 11:30:03 GMT https://community.hpe.com/t5/switches-hubs-and-modems/pcm-authentication-with-switches/m-p/3945335#M10453 Alessio Zarb 2007-02-15T11:30:03Z