https://community.hpe.com/t5/switches-hubs-and-modems/rom-update-mode-on-procurve-2524/m-p/3960575#M10676 ho do I update ROM version on Procurve 2524 switch? 'Show system' command shows ROM version 01.01. <BR />Firmware revision : F.05.55 <BR />ROM Version : F.01.01 <BR /><BR />I found command 'update' which Enters ROM update mode, can't find any info about it in documentation. What is it used for? Tue, 13 Mar 2007 03:58:10 GMT Igoris_1 2007-03-13T03:58:10Z https://community.hpe.com/t5/switches-hubs-and-modems/rom-update-mode-on-procurve-2524/m-p/3960575#M10676 ho do I update ROM version on Procurve 2524 switch? 'Show system' command shows ROM version 01.01. <BR />Firmware revision : F.05.55 <BR />ROM Version : F.01.01 <BR /><BR />I found command 'update' which Enters ROM update mode, can't find any info about it in documentation. What is it used for? Tue, 13 Mar 2007 03:58:10 GMT https://community.hpe.com/t5/switches-hubs-and-modems/rom-update-mode-on-procurve-2524/m-p/3960575#M10676 Igoris_1 2007-03-13T03:58:10Z https://community.hpe.com/t5/switches-hubs-and-modems/rom-update-mode-on-procurve-2524/m-p/3960576#M10677 With these switches, if a ROM upgrade is required it's automatically done during the firmware update. <BR /><BR />The 'update' command reboots the switch into Monitor ROM console (takes the switch offline, serial console access only). You should never need to use this. Tue, 13 Mar 2007 04:17:59 GMT https://community.hpe.com/t5/switches-hubs-and-modems/rom-update-mode-on-procurve-2524/m-p/3960576#M10677 Matt Hobbs 2007-03-13T04:17:59Z https://community.hpe.com/t5/switches-hubs-and-modems/rom-update-mode-on-procurve-2524/m-p/3960577#M10678 I have three 2524 switches and 2 of them have F.02.01.<BR />Is there any difference in operation, if ROM version is different? Tue, 13 Mar 2007 04:23:04 GMT https://community.hpe.com/t5/switches-hubs-and-modems/rom-update-mode-on-procurve-2524/m-p/3960577#M10678 Igoris_1 2007-03-13T04:23:04Z