https://community.hpe.com/t5/switches-hubs-and-modems/hp-switches-and-vlan-routing/m-p/4009055#M11467 Yes the 2626 is VLAN compliant so it will work if tagging is done appropriately. Tue, 29 May 2007 23:56:07 GMT Joel Belizario 2007-05-29T23:56:07Z https://community.hpe.com/t5/switches-hubs-and-modems/hp-switches-and-vlan-routing/m-p/4009054#M11466 I have 3 big wireless networks, each wireless client can VLAN TAG packets going out. All these vlan tagged packets come in on one CAT5 cable...<BR /><BR /><BR />My question,<BR />Can a procurve 2626 take 1 port connection that has the 3 different vlan tagged packets and then sort them to 3 different ports?<BR /> Tue, 29 May 2007 09:41:27 GMT https://community.hpe.com/t5/switches-hubs-and-modems/hp-switches-and-vlan-routing/m-p/4009054#M11466 Boyce LaForest 2007-05-29T09:41:27Z https://community.hpe.com/t5/switches-hubs-and-modems/hp-switches-and-vlan-routing/m-p/4009055#M11467 Yes the 2626 is VLAN compliant so it will work if tagging is done appropriately. Tue, 29 May 2007 23:56:07 GMT https://community.hpe.com/t5/switches-hubs-and-modems/hp-switches-and-vlan-routing/m-p/4009055#M11467 Joel Belizario 2007-05-29T23:56:07Z https://community.hpe.com/t5/switches-hubs-and-modems/hp-switches-and-vlan-routing/m-p/4009056#M11468 Hi<BR /><BR />Yes, you can tag the uplink to all these 3 Vlans after you create them on the 2600 switch.<BR /><BR />Then you can assign different ports to different Vlans by TAG or UNTAG.<BR /><BR />And you can enable IP Routing also if needed.<BR /><BR />Good Luck !!! Wed, 30 May 2007 00:02:41 GMT https://community.hpe.com/t5/switches-hubs-and-modems/hp-switches-and-vlan-routing/m-p/4009056#M11468 Mohieddin Kharnoub 2007-05-30T00:02:41Z