topic Re: PCM+ and STP in Switches, Hubs, and Modems

PCM+ and STP

Jaguar — Fri, 13 Jul 2007 08:31:39 GMT

Hi,

Can PCM+ display STP information? For example, if network topology change count increase, is there any way to display that information in PCM+?

Re: PCM+ and STP

Mohieddin Kharnoub — Fri, 13 Jul 2007 10:50:40 GMT

Hi

I'm not sure if you can get STP information such as Topology change count or alert.

But you can show the STP blocked lines, and i believe if you enable the Syslog, and destined it to the PCM, you should get enough info.

Good Luck !!!

Re: PCM+ and STP

Jaguar — Sat, 14 Jul 2007 04:11:19 GMT

Hi,
When you said "you can show the STP blocked lines", are you referring to network map?

Re: PCM+ and STP

Mohieddin Kharnoub — Sat, 14 Jul 2007 09:02:36 GMT

Hi

Yes in the network map you can see STP blocked lines if you have STP, RSTP

And if you have MSTP, you can see the blocked lines in the network map > Vlans.

Good Luck !!!