https://community.hpe.com/t5/switches-hubs-and-modems/procurve-2512-wont-work-with-telnet/m-p/4113816#M13023 Hi, just accuried 2 procurve 2512, when i connect the console cable to the switch and boot the switch i get the following<BR /><BR />ROM information: <BR /> Build directory: F:/switch/arm/rom<BR /> Build date: Aug 11 2001<BR /> Build time: 18:14:53<BR /> Build version: F.02.01<BR /> Build number: 03<BR /><BR />OS identifier found at @ 0x170a0000<BR />Verifying Image validity ...<BR />CRC on OS image header Passed<BR />CRC on complete OS image file Passed<BR />Valid OS image @ 0x170a0000<BR /><BR />Decompressing........................done.<BR />Verifying uncompressed image CRC.....pass.<BR />initializing...initialization done.<BR />Waiting for Speed Sense. Press <ENTER> twice to continue<BR /><BR />thats it, i cant press enter it wont work? the other switch is fine, so the cable is ok, the settings on hyperterminal have been checked, and i have reset the switch twice and powered up and down, any thoughts?<BR /><BR />Cheers<BR /><BR />Shaun</ENTER> Sat, 08 Dec 2007 23:12:24 GMT ShaunArrow 2007-12-08T23:12:24Z https://community.hpe.com/t5/switches-hubs-and-modems/procurve-2512-wont-work-with-telnet/m-p/4113816#M13023 Hi, just accuried 2 procurve 2512, when i connect the console cable to the switch and boot the switch i get the following<BR /><BR />ROM information: <BR /> Build directory: F:/switch/arm/rom<BR /> Build date: Aug 11 2001<BR /> Build time: 18:14:53<BR /> Build version: F.02.01<BR /> Build number: 03<BR /><BR />OS identifier found at @ 0x170a0000<BR />Verifying Image validity ...<BR />CRC on OS image header Passed<BR />CRC on complete OS image file Passed<BR />Valid OS image @ 0x170a0000<BR /><BR />Decompressing........................done.<BR />Verifying uncompressed image CRC.....pass.<BR />initializing...initialization done.<BR />Waiting for Speed Sense. Press <ENTER> twice to continue<BR /><BR />thats it, i cant press enter it wont work? the other switch is fine, so the cable is ok, the settings on hyperterminal have been checked, and i have reset the switch twice and powered up and down, any thoughts?<BR /><BR />Cheers<BR /><BR />Shaun</ENTER> Sat, 08 Dec 2007 23:12:24 GMT https://community.hpe.com/t5/switches-hubs-and-modems/procurve-2512-wont-work-with-telnet/m-p/4113816#M13023 ShaunArrow 2007-12-08T23:12:24Z https://community.hpe.com/t5/switches-hubs-and-modems/procurve-2512-wont-work-with-telnet/m-p/4113817#M13024 Hmm, that's happened to me too.<BR /><BR />Try another terminal program (TeraTerm) or maybe try using a higher speed than 9600.<BR /> Sun, 09 Dec 2007 03:20:29 GMT https://community.hpe.com/t5/switches-hubs-and-modems/procurve-2512-wont-work-with-telnet/m-p/4113817#M13024 frogtumor 2007-12-09T03:20:29Z