https://community.hpe.com/t5/switches-hubs-and-modems/nc360t-ip-setup-help/m-p/4160132#M13612 Sorry for any dup post, I think I posted this originally in the wrong forum section...<BR /><BR />I am installing this NIC in a Proliant ML350 G4 server this weekend. I have not done this before and am looking to find some general setup help.<BR /><BR />My understanding in that I will disable the built-in NIC and just use this dual nic. But do I assign 2 new IP's to the card ports, or do I just use the same 1 IP that is on the built-in nic?<BR /><BR />I have a total of 4 ML 350's and two have an additional nic and looking at the properties, those are setup with the same IP. <BR /><BR />Also, I'm not sure if I should setup th enic as teaming or just leave it as whatever the default is. Wed, 12 Mar 2008 12:08:17 GMT bftech 2008-03-12T12:08:17Z https://community.hpe.com/t5/switches-hubs-and-modems/nc360t-ip-setup-help/m-p/4160132#M13612 Sorry for any dup post, I think I posted this originally in the wrong forum section...<BR /><BR />I am installing this NIC in a Proliant ML350 G4 server this weekend. I have not done this before and am looking to find some general setup help.<BR /><BR />My understanding in that I will disable the built-in NIC and just use this dual nic. But do I assign 2 new IP's to the card ports, or do I just use the same 1 IP that is on the built-in nic?<BR /><BR />I have a total of 4 ML 350's and two have an additional nic and looking at the properties, those are setup with the same IP. <BR /><BR />Also, I'm not sure if I should setup th enic as teaming or just leave it as whatever the default is. Wed, 12 Mar 2008 12:08:17 GMT https://community.hpe.com/t5/switches-hubs-and-modems/nc360t-ip-setup-help/m-p/4160132#M13612 bftech 2008-03-12T12:08:17Z