topic Re: HP 2610 and rate-limiting in Switches, Hubs, and Modems

HP 2610 and rate-limiting

Alessandro_78 — Mon, 31 Mar 2008 15:55:27 GMT

Hi all
is possibile to set per-port rate-limiting on 2610 switches?

AFAIK Cisco does it granurally 1mb per 1mb.
Is possibile do the same on HP?

I need to set some ports to 2mbit/s.

Thanks.

Re: HP 2610 and rate-limiting

Alessandro_78 — Thu, 10 Apr 2008 07:04:56 GMT

Nobody can help me?

Re: HP 2610 and rate-limiting

Matt Hobbs — Thu, 10 Apr 2008 07:26:39 GMT

I'm fairly certain you need to go all the way up to the 3500/5400 for rate-limiting support. The 2610 definitely does not do it.

Re: HP 2610 and rate-limiting

Alessandro_78 — Sat, 12 Apr 2008 17:44:20 GMT

Ok, but more or less any other vendors (also that very cheap like linksys or dlink) does it on lower end switches.

Cisco does it on 500â ¬ switches and linksys does it on 400â ¬ switch.

Why HP does it only on switches over 2500â ¬ ?
May be a next features? It's very interesting...

Re: HP 2610 and rate-limiting

cenk sasmaztin — Mon, 14 Apr 2008 17:08:33 GMT

hi Alessandro
I see hp 1800 switch per port rate limiting
not see other edge switch

good luck..

Re: HP 2610 and rate-limiting

Matt Hobbs — Tue, 15 Apr 2008 01:13:08 GMT

The 1800 does broadcast/multicast rate limiting only which is different.

Re: HP 2610 and rate-limiting

cenk sasmaztin — Tue, 15 Apr 2008 15:47:31 GMT

sorry yess 1800 rate limit for broadcast rate limiting I think wrong