https://community.hpe.com/t5/switches-hubs-and-modems/gbe2c-log-errors/m-p/4334387#M17006 <!--!*#-->Per the Command Reference guide:<BR /><BR />Information dump<BR />Command: /info/dump<BR />Use the dump command to dump all switch information available from the Information Menu (10K or more,<BR />depending on your configuration). This data is useful for tuning and debugging switch performance.<BR />If you want to capture dump data to a file, set the communication software on your workstation to capture session<BR />data prior to issuing the dump commands. Fri, 09 Jan 2009 05:14:46 GMT DaGuru 2009-01-09T05:14:46Z https://community.hpe.com/t5/switches-hubs-and-modems/gbe2c-log-errors/m-p/4334386#M17005 Hi all,<BR /><BR />I had a problem on C7000 enclosure with 2 GBE2C switches, all the networking on this enclosure crashed than after a few minutes start again. We didn´t have access to all blades, ILO and OA.<BR /><BR />What i´d like to know if there are any command to collect log errors?<BR /><BR />Ex: on cisco switches we can apply the command: show tech-support.<BR /><BR />I´d apprecciate if anyone can help. Thu, 08 Jan 2009 21:40:21 GMT https://community.hpe.com/t5/switches-hubs-and-modems/gbe2c-log-errors/m-p/4334386#M17005 xelaab 2009-01-08T21:40:21Z https://community.hpe.com/t5/switches-hubs-and-modems/gbe2c-log-errors/m-p/4334387#M17006 <!--!*#-->Per the Command Reference guide:<BR /><BR />Information dump<BR />Command: /info/dump<BR />Use the dump command to dump all switch information available from the Information Menu (10K or more,<BR />depending on your configuration). This data is useful for tuning and debugging switch performance.<BR />If you want to capture dump data to a file, set the communication software on your workstation to capture session<BR />data prior to issuing the dump commands. Fri, 09 Jan 2009 05:14:46 GMT https://community.hpe.com/t5/switches-hubs-and-modems/gbe2c-log-errors/m-p/4334387#M17006 DaGuru 2009-01-09T05:14:46Z