topic Re: Siwtch Fault in Switches, Hubs, and Modems

Siwtch Fault

skhargotre — Thu, 05 Feb 2009 07:18:46 GMT

Hi we have installed HP Switch 2610, It was working properly, but now fault light is Blinking and Uplik port number 25 is also Blinking but cable is not conected to the port uplink.
Attaching Log file.

Can any help me on this.

Re: Siwtch Fault

Pieter 't Hart — Fri, 06 Feb 2009 08:12:00 GMT

>>>Event Log listing: Events Since Boot <<<

=> no info in log from before the boot
>>>
I 01/01/90 00:14:29 system: System went down: 01/01/90 00:14:08
I 01/01/90 00:14:29 system: Operator warm reload from TELNET session.
<<<

=> looks like operator issued reload command from telnet session
This could be the reason for the restart?

ports 18, 24 and 25 seems to be connected to other switches
Through these switches there is a loop in the network. wich results in some ports being blocked by STP

Re: Siwtch Fault

cenk sasmaztin — Fri, 06 Feb 2009 16:20:20 GMT

hi please send me sh tech print