https://community.hpe.com/t5/switches-hubs-and-modems/hp-procurve-2650-with-network-monitoring/m-p/4430071#M18651 Hi,<BR /><BR />Is Procurve 2650 enabled to do network monitoring? I'm trying to install a PC with 2 network card so that i could stream all network through this pc and monitor what is being downloaded or uploaded. Mon, 01 Jun 2009 08:46:43 GMT Neo Koh Wei 2009-06-01T08:46:43Z https://community.hpe.com/t5/switches-hubs-and-modems/hp-procurve-2650-with-network-monitoring/m-p/4430071#M18651 Hi,<BR /><BR />Is Procurve 2650 enabled to do network monitoring? I'm trying to install a PC with 2 network card so that i could stream all network through this pc and monitor what is being downloaded or uploaded. Mon, 01 Jun 2009 08:46:43 GMT https://community.hpe.com/t5/switches-hubs-and-modems/hp-procurve-2650-with-network-monitoring/m-p/4430071#M18651 Neo Koh Wei 2009-06-01T08:46:43Z https://community.hpe.com/t5/switches-hubs-and-modems/hp-procurve-2650-with-network-monitoring/m-p/4430072#M18652 For the 2600 series of switches, there is a feature called "Port Mirroring", through which you can designate a port for monitoring inbound (ingress) and outbound (egress) traffic of other ports and of static trunks on the switch. <BR />The switch monitors the network activity by copying all inbound and outbound traffic on the specified interfaces to the designated monitoring port, to which a network analyzer can be attached.<BR /><BR />Check this chapter for configuration etc:<BR /><A href="http://ftp.hp.com/pub/networking/software/Mgmt-Oct2005-59906023-AppB.pdf" target="_blank">http://ftp.hp.com/pub/networking/software/Mgmt-Oct2005-59906023-AppB.pdf</A><BR /><BR /><BR />Hope that helps!<BR />Javed Tue, 02 Jun 2009 03:37:09 GMT https://community.hpe.com/t5/switches-hubs-and-modems/hp-procurve-2650-with-network-monitoring/m-p/4430072#M18652 Javed Padinhakara 2009-06-02T03:37:09Z