https://community.hpe.com/t5/switches-hubs-and-modems/routing-question/m-p/4476003#M19409 hi Pedro please send me sh run print Mon, 10 Aug 2009 11:25:52 GMT cenk sasmaztin 2009-08-10T11:25:52Z https://community.hpe.com/t5/switches-hubs-and-modems/routing-question/m-p/4476002#M19408 I have a hp switch acting as a router for two vlans. However, I want the two vlan to connect to a firewall via two indepedent cables which connect to two individual interfaces on the firewall..<BR /><BR />at this moment, only one of the vlan is able to connect to the firewall. The second vlan can only ping the gateway but not connect to the internet.<BR /><BR />The firewall has a static connection between the firewall interface ip address and the vlan ip address.<BR /><BR />Can you help? Sun, 09 Aug 2009 22:44:56 GMT https://community.hpe.com/t5/switches-hubs-and-modems/routing-question/m-p/4476002#M19408 Pedro_73 2009-08-09T22:44:56Z https://community.hpe.com/t5/switches-hubs-and-modems/routing-question/m-p/4476003#M19409 hi Pedro please send me sh run print Mon, 10 Aug 2009 11:25:52 GMT https://community.hpe.com/t5/switches-hubs-and-modems/routing-question/m-p/4476003#M19409 cenk sasmaztin 2009-08-10T11:25:52Z