https://community.hpe.com/t5/switches-hubs-and-modems/procurve-2910al-with-jumbo-frames-amp-flow-control/m-p/4492336#M19677 This was for the 2900 series<BR /><BR /><A href="http://cdn.procurve.com/training/Manuals/2910-MCG-Feb09-13-PortTraffic.pdf" target="_blank">http://cdn.procurve.com/training/Manuals/2910-MCG-Feb09-13-PortTraffic.pdf</A><BR /><BR />it indicates that both flow control and jumbo frames can be supported simultaneously.<BR /><BR />Page 16, second bullet: "The switch allows flow control and jumbo frame capability to co-exist on a port." Tue, 29 Sep 2009 08:46:08 GMT Tijl van der Steeg 2009-09-29T08:46:08Z https://community.hpe.com/t5/switches-hubs-and-modems/procurve-2910al-with-jumbo-frames-amp-flow-control/m-p/4492335#M19676 I have a customer who needs to run both Jumbo Frames and flow control. Hp technical support says this isn't possible with this switch. I'm fairly certain this was addressed with a firmware upgrade some time ago. Does anyone know for sure? I hate to disagree with tech support, but if it's true I have to take back the switches. Thanks Fri, 04 Sep 2009 22:03:42 GMT https://community.hpe.com/t5/switches-hubs-and-modems/procurve-2910al-with-jumbo-frames-amp-flow-control/m-p/4492335#M19676 Tom Riley1 2009-09-04T22:03:42Z https://community.hpe.com/t5/switches-hubs-and-modems/procurve-2910al-with-jumbo-frames-amp-flow-control/m-p/4492336#M19677 This was for the 2900 series<BR /><BR /><A href="http://cdn.procurve.com/training/Manuals/2910-MCG-Feb09-13-PortTraffic.pdf" target="_blank">http://cdn.procurve.com/training/Manuals/2910-MCG-Feb09-13-PortTraffic.pdf</A><BR /><BR />it indicates that both flow control and jumbo frames can be supported simultaneously.<BR /><BR />Page 16, second bullet: "The switch allows flow control and jumbo frame capability to co-exist on a port." Tue, 29 Sep 2009 08:46:08 GMT https://community.hpe.com/t5/switches-hubs-and-modems/procurve-2910al-with-jumbo-frames-amp-flow-control/m-p/4492336#M19677 Tijl van der Steeg 2009-09-29T08:46:08Z