https://community.hpe.com/t5/switches-hubs-and-modems/cli-knowledge-survey/m-p/4498516#M19823 when moving from one manufacturer CLI to another, which direction do you find the hardest to learn -or- get used to?<BR /><BR />option 1: you know cisco cli and have to learn procurve cli<BR /><BR />option 2: you know procurve cli and have to learn cisco cli<BR /><BR /><BR />just curious what others think about it and/or any specific experiences/thoughts you might want to share...<BR /><BR /><BR />kind regards...jeff Wed, 16 Sep 2009 11:49:33 GMT Jeff Carrell 2009-09-16T11:49:33Z https://community.hpe.com/t5/switches-hubs-and-modems/cli-knowledge-survey/m-p/4498516#M19823 when moving from one manufacturer CLI to another, which direction do you find the hardest to learn -or- get used to?<BR /><BR />option 1: you know cisco cli and have to learn procurve cli<BR /><BR />option 2: you know procurve cli and have to learn cisco cli<BR /><BR /><BR />just curious what others think about it and/or any specific experiences/thoughts you might want to share...<BR /><BR /><BR />kind regards...jeff Wed, 16 Sep 2009 11:49:33 GMT https://community.hpe.com/t5/switches-hubs-and-modems/cli-knowledge-survey/m-p/4498516#M19823 Jeff Carrell 2009-09-16T11:49:33Z https://community.hpe.com/t5/switches-hubs-and-modems/cli-knowledge-survey/m-p/4498517#M19824 Hi,<BR /><BR />I'm in the option 2 group but I don't usually find locating the cisco command difficult. I've recently had to configure a Juniper EX4200 however and that is _completely_ different!<BR /><BR />Mo Fri, 18 Sep 2009 06:52:10 GMT https://community.hpe.com/t5/switches-hubs-and-modems/cli-knowledge-survey/m-p/4498517#M19824 Mohammed Faiz 2009-09-18T06:52:10Z