https://community.hpe.com/t5/switches-hubs-and-modems/trunk-over-stack/m-p/4514660#M20209 I think the stacking for the 2510 is just the management interface. You cannot do distributed trunking. Therefore you would need a 3500/5400/6200 Thu, 15 Oct 2009 07:47:56 GMT Tijl van der Steeg 2009-10-15T07:47:56Z https://community.hpe.com/t5/switches-hubs-and-modems/trunk-over-stack/m-p/4514659#M20208 Good morning,<BR /><BR />I plan to buy 2 2510G and 4 2610.<BR />I have got a server with 2 network cards.<BR />I would like to stack the two 2510. <BR /><BR /><BR />Is it possible to do trunks (on port on each 2510) with the other switchs and connect the server on each 2510 with teaming activated like this :<BR /><BR />first 2510 port 20 ------- first 2610 port 22<BR />second 2510 port 20 ------ first 2610 port 23<BR /><BR />first 2510 port 21 ------- 2nd 2610 port 22<BR />second 2510 port 21 ------ 2nd 2610 port 23<BR /><BR />first 2510 port 1 ------- Server 1 port 1<BR />second 2510 port 1 ------ Server 1 port 2<BR /><BR />Thank you for the answer Thu, 15 Oct 2009 06:26:01 GMT https://community.hpe.com/t5/switches-hubs-and-modems/trunk-over-stack/m-p/4514659#M20208 Micoud 2009-10-15T06:26:01Z https://community.hpe.com/t5/switches-hubs-and-modems/trunk-over-stack/m-p/4514660#M20209 I think the stacking for the 2510 is just the management interface. You cannot do distributed trunking. Therefore you would need a 3500/5400/6200 Thu, 15 Oct 2009 07:47:56 GMT https://community.hpe.com/t5/switches-hubs-and-modems/trunk-over-stack/m-p/4514660#M20209 Tijl van der Steeg 2009-10-15T07:47:56Z