https://community.hpe.com/t5/switches-hubs-and-modems/procurve-4208/m-p/4529853#M20441 Did you try to use manual trunk, below is the command for the manual trunk configuration,<BR /><BR />#trunk <PORTS> trk1 trunk<BR /><BR /><BR />Regards<BR /></PORTS> Mon, 09 Nov 2009 05:15:56 GMT Shadow13 2009-11-09T05:15:56Z https://community.hpe.com/t5/switches-hubs-and-modems/procurve-4208/m-p/4529852#M20440 Hello <BR /> i'm trying to configure an hp procurve 4208 switch with an intel pro/1000 4 port nic but teaming doesn't work. i also noticed that the switch port shows a green light for link but none for mode. i used same speed on nic and switch , also used auto senseing , still doen'nt work.<BR /><BR /> <BR />2- does procurve 4208 support loop protect? <BR /> Sun, 08 Nov 2009 22:50:33 GMT https://community.hpe.com/t5/switches-hubs-and-modems/procurve-4208/m-p/4529852#M20440 donaldt 2009-11-08T22:50:33Z https://community.hpe.com/t5/switches-hubs-and-modems/procurve-4208/m-p/4529853#M20441 Did you try to use manual trunk, below is the command for the manual trunk configuration,<BR /><BR />#trunk <PORTS> trk1 trunk<BR /><BR /><BR />Regards<BR /></PORTS> Mon, 09 Nov 2009 05:15:56 GMT https://community.hpe.com/t5/switches-hubs-and-modems/procurve-4208/m-p/4529853#M20441 Shadow13 2009-11-09T05:15:56Z