topic Re: there is any "boot set-default flash secondary" command equivalent in K.12.25? in Switches, Hubs, and Modems

there is any "boot set-default flash secondary" command equivalent in K.12.25?

Marco Lin — Tue, 23 Feb 2010 22:49:03 GMT

There is any way to set boot from secondary as default on K.12.25 code?

boot system flash secondary it will cause immediately reboot.

Any ideas?

Re: there is any "boot set-default flash secondary" command equivalent in K.12.25?

Ralf Krause — Thu, 25 Feb 2010 09:22:16 GMT

You can specify the default flash to boot from on the next boot by entering the boot set-default flash command.

Syntax: boot set-default flash [primary |secondary]

This command is available in global config mode.

Ralf