https://community.hpe.com/t5/switches-hubs-and-modems/mac-based-auth-and-addr-limit/m-p/4689779#M23892 try this command:<BR />show port-access [PORT-LIST] mac-based<BR />[<CONFIG>|clients]</CONFIG> Sat, 25 Sep 2010 12:16:39 GMT Shadow13 2010-09-25T12:16:39Z https://community.hpe.com/t5/switches-hubs-and-modems/mac-based-auth-and-addr-limit/m-p/4689778#M23891 Hi all,<BR /><BR />I've setup switches using mac based auth and works fine so far. I want to restrict my ports to a defined number of macs and this works too which means the n+1st client is simply locked out. The point is that I don't find any log entries or counters or hints that the max number of clients is exceeded so trouble shooting becomes almost impossible as it is just about guessing. Is there some point that I missed to get the desired notification?<BR /><BR />Best regards,<BR />Sven Wed, 22 Sep 2010 05:27:15 GMT https://community.hpe.com/t5/switches-hubs-and-modems/mac-based-auth-and-addr-limit/m-p/4689778#M23891 sven_k 2010-09-22T05:27:15Z https://community.hpe.com/t5/switches-hubs-and-modems/mac-based-auth-and-addr-limit/m-p/4689779#M23892 try this command:<BR />show port-access [PORT-LIST] mac-based<BR />[<CONFIG>|clients]</CONFIG> Sat, 25 Sep 2010 12:16:39 GMT https://community.hpe.com/t5/switches-hubs-and-modems/mac-based-auth-and-addr-limit/m-p/4689779#M23892 Shadow13 2010-09-25T12:16:39Z https://community.hpe.com/t5/switches-hubs-and-modems/mac-based-auth-and-addr-limit/m-p/4689780#M23893 Already done but no hint about reaching or exceeding the max number of macs. Got a reply from HP that the requested info is missing. Will be passed to the labs and perhaps considered in future release. Nevertheless thanks for the reply<BR /><BR />Sven Mon, 27 Sep 2010 04:07:44 GMT https://community.hpe.com/t5/switches-hubs-and-modems/mac-based-auth-and-addr-limit/m-p/4689780#M23893 sven_k 2010-09-27T04:07:44Z