topic Re: Having problem accessing Procurve 2510 using console in Switches, Hubs, and Modems

Having problem accessing Procurve 2510 using console

cashqoo — Mon, 04 Apr 2011 09:11:19 GMT

i am having problem as per subject with 2 new switches.2510-24 and 2510-48

i am using windows xp, hyper terminal, with usb-to-serial convertor.
Hyper terminal settings as follows:
-VT100
-9600
-no parity bit
-8 data bit
-1 stop bit
-Xon / Xoff control

the hyper terminal is not responding on pressing "enter". upon rebooting the switch, i can see some output, but the hyper terminal becomes not responding shortly after.
i cant even enter a command.

tried the following, still the same results.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=115&prodSeriesId=4063679&prodTypeId=12883&objectID=c02609092

apprepricate any advice on resolving the issue.

Re: Having problem accessing Procurve 2510 using console

cenk sasmaztin — Mon, 04 Apr 2011 12:46:51 GMT

can you test teraterm pro

http://hp.vector.co.jp/authors/VA002416/teraterm.html

Re: Having problem accessing Procurve 2510 using console

cashqoo — Tue, 05 Apr 2011 06:35:48 GMT

i am unable to download the file from the mentioned website. i have used tera term 4.69 instead.
"http://en.sourceforge.jp/projects/ttssh2/releases/"

both hyper terminal and tera term are giving the same results. when i attempt to reboot the switch, i get the following output and it just hang there.

#############################################
ROM information:
Build directory: /sw/rom/build/harprom(harp)
Build date: Jul 28 2006
Build time: 11:18:33
Build version: Q.10.02
Build number: 11350

OS identifier found at @ 0xbc020000
Verifying Image validity ...
CRC on OS image header Passed
CRC on complete OS image file Passed
Valid OS image @ 0xbc020000

Decompressing...done.
CRC of image is 0xa1572cf8
CRC @ 0x80001000 Len 7826960 is 0xa1572cf8
#############################################

Re: Having problem accessing Procurve 2510 using console

cenk sasmaztin — Tue, 05 Apr 2011 07:29:08 GMT

are you sure is procurve 2510 switch ???

Re: Having problem accessing Procurve 2510 using console

cashqoo — Tue, 05 Apr 2011 08:53:43 GMT

yes. both are 2510. the output posted earlier is from one of the switches.

i managed to access the switches via telnet (advice from other threads) by using a dhcp server to allow the switch to have an ip address first.

Re: Having problem accessing Procurve 2510 using console

cashqoo — Tue, 05 Apr 2011 08:56:05 GMT

[cont from earlier reply]
even though i have set the baud rate, accessing through console still does not seems to work.

the configuration of the switch is attached.