https://community.hpe.com/t5/switches-hubs-and-modems/hp-cisco-3020-amp-clustering-alternative/m-p/4773566#M25692 Hello, <BR /><BR />I'm finding conflicting information about wether I can cluster the HP Cisco 3020 Switches in my C7000 enclosure or not. The Cisco site Says it's not supported, and the HP documents indicate it may very well be.<BR /><BR />Clustering may be overblown, all I am trying to do is have the configuration of one switch automatically replicate to the adjacent switch so that failover between switches is consistent.<BR /><BR />So <BR />bay 1 should replicate to bay 2<BR />bay 5 should replicate to bay 6<BR />bay 7 should replicate to bay 8<BR /><BR />Thank you for any direction on this,<BR /><BR /><BR /> Mon, 04 Apr 2011 19:41:53 GMT Cheshire42 2011-04-04T19:41:53Z https://community.hpe.com/t5/switches-hubs-and-modems/hp-cisco-3020-amp-clustering-alternative/m-p/4773566#M25692 Hello, <BR /><BR />I'm finding conflicting information about wether I can cluster the HP Cisco 3020 Switches in my C7000 enclosure or not. The Cisco site Says it's not supported, and the HP documents indicate it may very well be.<BR /><BR />Clustering may be overblown, all I am trying to do is have the configuration of one switch automatically replicate to the adjacent switch so that failover between switches is consistent.<BR /><BR />So <BR />bay 1 should replicate to bay 2<BR />bay 5 should replicate to bay 6<BR />bay 7 should replicate to bay 8<BR /><BR />Thank you for any direction on this,<BR /><BR /><BR /> Mon, 04 Apr 2011 19:41:53 GMT https://community.hpe.com/t5/switches-hubs-and-modems/hp-cisco-3020-amp-clustering-alternative/m-p/4773566#M25692 Cheshire42 2011-04-04T19:41:53Z