topic Re: Clearing loop-protection counteres in Switches, Hubs, and Modems

Clearing loop-protection counteres

Eikefjord — Thu, 30 Jun 2011 09:53:52 GMT

I'm wondering it there is an command that can clear the counter for loop-protection view.

As you can see, port 36 is still reporting that it has detected loop....but this is not the case.

So how can I reset the counters??

Port Protection Detected Count Since Last Loop Action Status
---- ----------- --------- ---------- ---------------- ------------ --------

5 Yes Yes 149 9d,13h,55m,31s send-disable Down

36 Yes Yes 164 155d,20h,16m,34s send-disable Up

LucianoCarvalho — Thu, 30 Jun 2011 11:34:26 GMT

Hello,

Maybe disabling/enabling loop-protection on the port will clear the counters for that port.

regards.

Eikefjord — Thu, 30 Jun 2011 15:01:49 GMT

thanks, didn't think of doing that :-)

FMaster007 — Fri, 16 Oct 2020 18:31:43 GMT

Hi there! What command is that? I have a port that was re-enabled from a loop but still showing loop detected and time since the last loop.

FMaster007 — Mon, 19 Oct 2020 18:54:06 GMT

Hi there! What command is that? I have a port that was re-enabled from a loop but still showing loop detected and time since the last loop.