https://community.hpe.com/t5/switches-hubs-and-modems/cdp-vs-lldp/m-p/4989790#M27104 I seem to be getting some strange differences between CDP and LLDP on some of my networks. PCM is not mapping some of my devices (2.1 most recent patch). If I run show cdp n and show lldp info remote-device on the core 5308 at one site, I get different results, CDP only shows one of the 3 connected other 5308's, LLDP shows all 3 of the connected devices. PCM seems to only use CDP and thus will not map all the 5308's...<BR />Thoughts? Mon, 10 Jul 2006 12:18:20 GMT RobB_8 2006-07-10T12:18:20Z https://community.hpe.com/t5/switches-hubs-and-modems/cdp-vs-lldp/m-p/4989790#M27104 I seem to be getting some strange differences between CDP and LLDP on some of my networks. PCM is not mapping some of my devices (2.1 most recent patch). If I run show cdp n and show lldp info remote-device on the core 5308 at one site, I get different results, CDP only shows one of the 3 connected other 5308's, LLDP shows all 3 of the connected devices. PCM seems to only use CDP and thus will not map all the 5308's...<BR />Thoughts? Mon, 10 Jul 2006 12:18:20 GMT https://community.hpe.com/t5/switches-hubs-and-modems/cdp-vs-lldp/m-p/4989790#M27104 RobB_8 2006-07-10T12:18:20Z https://community.hpe.com/t5/switches-hubs-and-modems/cdp-vs-lldp/m-p/4989791#M27105 discovered was due to new firmware Mon, 10 Jul 2006 14:17:06 GMT https://community.hpe.com/t5/switches-hubs-and-modems/cdp-vs-lldp/m-p/4989791#M27105 RobB_8 2006-07-10T14:17:06Z