topic Re: Create new VLAN - Commit failed . in Switches, Hubs, and Modems

Create new VLAN - Commit failed .

Tomek Orzechowski — Tue, 29 Jul 2008 09:38:03 GMT

switch_p23-1# sh version
Image stamp: /sw/code/build/fish(mkfs)
Oct 9 2007 15:00:51
H.10.50
359
Boot Image: Primary
switch_p23-1# sh vlans

Status and Counters - VLAN Information

Maximum VLANs to support : 16
Primary VLAN : DEFAULT_VLAN
Management VLAN : ADMIN

802.1Q VLAN ID Name Status Voice
-------------- ------------ ------------ -----
1 DEFAULT_VLAN Port-based No
5 SERVERS Port-based No
6 ADMIN Port-based No
11 PIETRO_23 Port-based No
13 WIFI Port-based No
117 Printers Port-based No
118 Guests Port-based No
127 VoIP Port-based Yes

switch_p23-1# conf t
switch_p23-1(config)# vlan 300
300: Commit failed.
switch_p23-1(config)#

Any ideas?

Re: Create new VLAN - Commit failed .

Tomek Orzechowski — Tue, 29 Jul 2008 09:44:40 GMT

Forgot to mention: HP Procurve 2650.

Re: Create new VLAN - Commit failed .

Tomek Orzechowski — Tue, 29 Jul 2008 09:53:42 GMT

Works after reboot. I guess someone changed max-vlans but forgot to reload device.

Re: Create new VLAN - Commit failed .

Tomek Orzechowski — Tue, 29 Jul 2008 09:54:14 GMT

Works.

Re: Create new VLAN - Commit failed .

Paulen — Wed, 30 Jul 2008 04:41:24 GMT

I have had this error on other models as well, and it is not due to a max vlans value. You will also see that you have a persistent bug in the menu system, if you try and add a vlan there you will get error message similar to "can only untag one vlan per port" - which also is bogous.

HP has had this bug for ages.