https://community.hpe.com/t5/switches-hubs-and-modems/vlan-and-acl-help-please/m-p/5135830#M28468 n/a Fri, 17 Oct 2008 09:09:44 GMT Ria 2008-10-17T09:09:44Z https://community.hpe.com/t5/switches-hubs-and-modems/vlan-and-acl-help-please/m-p/5135828#M28466 Hello <BR /><BR />I have a pc in my trust that is not a trust pc. Therefore I want the user to be able to access the internet, get the IP address from DHCP and be able to resolve the hostname in DNS. But I don’t want the pc to have access to anything else on our network. I am thinking of creating a separate vlan and assign the specific ports on a switch to this vlan. But I don’t want this vlan to be able to communicate with any other vlans on the same switch or allow access to anything else in our network. <BR /><BR />I am looking for suggestions on how I could configure the access control list and vlan itself. We have foundry switches as cores and 4400 3com switches within individual departments within our trust. Any help or suggestions would be much appreciated. <BR /><BR />Many thanks,<BR />Rita<BR /> Wed, 15 Oct 2008 16:01:06 GMT https://community.hpe.com/t5/switches-hubs-and-modems/vlan-and-acl-help-please/m-p/5135828#M28466 Ria 2008-10-15T16:01:06Z https://community.hpe.com/t5/switches-hubs-and-modems/vlan-and-acl-help-please/m-p/5135829#M28467 hi Rita <BR />this forum for Hp networking products Thu, 16 Oct 2008 11:37:21 GMT https://community.hpe.com/t5/switches-hubs-and-modems/vlan-and-acl-help-please/m-p/5135829#M28467 cenk sasmaztin 2008-10-16T11:37:21Z https://community.hpe.com/t5/switches-hubs-and-modems/vlan-and-acl-help-please/m-p/5135830#M28468 n/a Fri, 17 Oct 2008 09:09:44 GMT https://community.hpe.com/t5/switches-hubs-and-modems/vlan-and-acl-help-please/m-p/5135830#M28468 Ria 2008-10-17T09:09:44Z