topic Re: routing between networks with HP 2910al in Switches, Hubs, and Modems

routing between networks with HP 2910al

michaeltfus — Thu, 28 Jul 2011 01:27:31 GMT

I have a 2910al and would like to configure a port (or ports) to be able to route traffic from one network 10.1.1.0 /16 to another network 10.100.0.0 /16 and visa-versa. I am currently using a W2K3 server for routing, but I would like to do away with that box and just use the switch.

How would I configure the switch (port) to route data? Do I need two ports on the switch, each configured as its own VLAN, one with a 10.1.1.x IP and the other with a 10.100.0.x IP?

I am having a difficult time wrapping my head around this one.

Re: routing between networks with HP 2910al

EckerA — Mon, 01 Aug 2011 07:50:40 GMT

Hi,

something like this?:

conf t

ip routing

vlan 1

untagged 1

ip address 10.1.1.1/16

exit

vlan 2

untagged 2

ip address 10.100.0.1/16

exit

vlan 3

untagged 3

exit

ip route 0.0.0.0 0.0.0.0 <next hop router>

wr mem

vlan 3 is not routed cos it doesn't have an ip...

hth

alex