https://community.hpe.com/t5/switches-hubs-and-modems/vlan-configuration/m-p/5329153#M30199 <P>Facility with one 5412 Chassis switch and 11 Procurve 2510-48 switches.&nbsp; All 11 of the 2510's are connected to switch A (24 port) in the 5412 chassis.</P><P>&nbsp;</P><P>Have 15 Cisco wireless access points that are currently only setup for private access.&nbsp; Need to set these up for public access.&nbsp; Want to configure a public_access vlan on the switches so that I can pass traffic both public and private, but not exactly sure how to go about it or where to start.</P><P>&nbsp;</P><P>Any advice would be appreciated.</P> Mon, 12 Sep 2011 15:37:45 GMT smjones45832 2011-09-12T15:37:45Z https://community.hpe.com/t5/switches-hubs-and-modems/vlan-configuration/m-p/5329153#M30199 <P>Facility with one 5412 Chassis switch and 11 Procurve 2510-48 switches.&nbsp; All 11 of the 2510's are connected to switch A (24 port) in the 5412 chassis.</P><P>&nbsp;</P><P>Have 15 Cisco wireless access points that are currently only setup for private access.&nbsp; Need to set these up for public access.&nbsp; Want to configure a public_access vlan on the switches so that I can pass traffic both public and private, but not exactly sure how to go about it or where to start.</P><P>&nbsp;</P><P>Any advice would be appreciated.</P> Mon, 12 Sep 2011 15:37:45 GMT https://community.hpe.com/t5/switches-hubs-and-modems/vlan-configuration/m-p/5329153#M30199 smjones45832 2011-09-12T15:37:45Z