IDM: Switch not not sending RADIUS request to IAS server. Please help!

swaizey — Tue, 13 Sep 2011 16:53:32 GMT

Hi all...

I'm using IDM for the first time. Basically I want all non-authenitcated users to default to VLAN 39 and all authenticated users to be assigned to the default VLAN 1.

Have set up a test switch . Secured ports are 1-24. RADIUS server is 10.1.10.96. Please refer to attached config.

So, when I test with a laptop connected to my test switch on port 8, it always seemes to end up in VLAN 39, i.e it's always un-authenticated. I see this is the logs:

I 09/13/11 17:45:42 ports: port 8 is now off-line

I 09/13/11 17:45:44 ports: port 8 is now on-line

I 09/13/11 17:45:53 vlan: SPF virtual LAN enabled

I 09/13/11 17:45:53 ip: SPF: network enabled on 192.168.244.1

The strange thing is the switch isn't even attempting to contact the RADIUS server. I have confirmed this by running a packet trace on the RADIUS server (10.1.10.96) while the laptop is booting up connected on the test switch. No packets are recieved from the authenitcator device, in this case my test switch (192.168.255.99). I made sure I could ping the test switch from the RADIUS server and vice versa.

Any help/ideas much appreciated.

Thanks.

Re: IDM: Switch not not sending RADIUS request to IAS server. Please help!

swaizey — Wed, 14 Sep 2011 12:03:55 GMT

bump

Re: IDM: Switch not not sending RADIUS request to IAS server. Please help!

swaizey — Wed, 14 Sep 2011 12:15:35 GMT

On a side note...

If you have multiple management addresses set up on a switch... how does it decide which address to send the RADIUS request from?

topic Re: IDM: Switch not not sending RADIUS request to IAS server. Please help! in Switches, Hubs, and Modems

IDM: Switch not not sending RADIUS request to IAS server. Please help!

Re: IDM: Switch not not sending RADIUS request to IAS server. Please help!

Re: IDM: Switch not not sending RADIUS request to IAS server. Please help!