https://community.hpe.com/t5/switches-hubs-and-modems/implementing-stp-rollout-question/m-p/5687867#M30886 <P>Hi,</P><P>&nbsp;</P><P>I want to implement STP in our network.</P><P>&nbsp;</P><P>I've read a bit about it but I did'nt find any answer to this question:</P><P>&nbsp;</P><P>If I want to roll out STP, does it have to be enabled on all devices at the same time (which will be a bit complicated - because there are several locations which arent reachable at the same time by three persons), or can I implement it on the Root-Bridge and some "core" switches and then adopt the other location - step by step?</P><P>&nbsp;</P><P>&nbsp;</P><P>Thanks in advance</P><P>&nbsp;</P><P>Bjoern</P> Tue, 12 Jun 2012 13:24:27 GMT Björn Andreas Höfer 2012-06-12T13:24:27Z https://community.hpe.com/t5/switches-hubs-and-modems/implementing-stp-rollout-question/m-p/5687867#M30886 <P>Hi,</P><P>&nbsp;</P><P>I want to implement STP in our network.</P><P>&nbsp;</P><P>I've read a bit about it but I did'nt find any answer to this question:</P><P>&nbsp;</P><P>If I want to roll out STP, does it have to be enabled on all devices at the same time (which will be a bit complicated - because there are several locations which arent reachable at the same time by three persons), or can I implement it on the Root-Bridge and some "core" switches and then adopt the other location - step by step?</P><P>&nbsp;</P><P>&nbsp;</P><P>Thanks in advance</P><P>&nbsp;</P><P>Bjoern</P> Tue, 12 Jun 2012 13:24:27 GMT https://community.hpe.com/t5/switches-hubs-and-modems/implementing-stp-rollout-question/m-p/5687867#M30886 Björn Andreas Höfer 2012-06-12T13:24:27Z