topic Re: Hp A5500 and procurve 2610 in Switches, Hubs, and Modems

Hp A5500 and procurve 2610

oscarfourie — Wed, 18 Sep 2013 18:42:11 GMT

I am trying to set up vlans between HP a5500 and a hp procurve 2610. i am going to use the a5500 as the core switch and the procurve 2610 as the access switch. i am not too sure how to do the vlan or the intervlan routing.

there is going to be 10 vlans tat will be in use.

can anybody help?

Re: Hp A5500 and procurve 2610

Fredrik Lönnman — Wed, 18 Sep 2013 18:55:02 GMT

Set ut the vlan and SVIs on the 5500 and trunk the VLANs to the 2610.

Re: Hp A5500 and procurve 2610

oscarfourie — Wed, 18 Sep 2013 18:59:58 GMT

ok but what would the config look like? is ther any configuration guides for this?

Re: Hp A5500 and procurve 2610

Fredrik Lönnman — Thu, 19 Sep 2013 05:20:49 GMT

5 second google came up with this:

http://www.hp.com/rnd/support/manuals/2610.htm
http://h20565.www2.hp.com/portal/site/hpsc/public/psi/manualsResults/?sp4ts.oid=4174795&ac.admitted=1379567896928.876444892.492883150

Re: Hp A5500 and procurve 2610

Vince_Whirlwind — Thu, 19 Sep 2013 06:53:51 GMT

vlan 100

name DATA

vlan 200

description VOICE

vlan 250

description ADMIN

interface Vlan-interface100
   ip address 10.1.100.0 24
interface Vlan-interface200
   ip address 10.1.200.0 24
interface Vlan-interface250
   ip address 10.1.250.0 24

interface Bridge-Aggregation10
description Trunk_to_Access
port link-type trunk
port trunk permit vlan all
link-aggregation mode dynamic

interface Ten-GigabitEthernet1/0/1
description Downlink#1
port link-type trunk
port trunk permit vlan all
port link-aggregation group 1

interface Ten-GigabitEthernet1/0/2
description Downlink#2
port link-type trunk
port trunk permit vlan all
port link-aggregation group 1

The procurve is similar, minus the IPs on the VLAN interfaces, and you create the trunk by doing:

trunk 23 trk1 lacp

trunk 24 trk1 lacp

vlan 100 tagged trk1

vlan 200 tagged trk1

vlan 250 tagged trk1

If the link-aggregation doesn't work, change the H3C side to "static" in stead of dynamic, and the Procurve side to "trunk" instead of lacp.