topic Re: With DSL modem, can't go to stand by mode. in Switches, Hubs, and Modems

With DSL modem, can't go to stand by mode.

Michael_386 — Sun, 11 Jul 2004 21:53:43 GMT

I am about to have DSL service starting on Tuesday. I have already recieved the 2WIRE wireless modem. I have my desktop plugged in with ethernet cable. I will have laptop on with wireless.

I have hooked up the modem to desktop already. Since then I can't go to stand-by mode. Everything shuts down fine. Then a minute later it turns back on. Even in hibernation mode it does the same. I also have tried the network enabled and disabled. Same thing happens either way.

Why is this and how can I fix this? I don't want to run CPU when I am not home.

My Computer- Windows XP Home, HP Pavilion 752n

Thanks,
Michael

Re: With DSL modem, can't go to stand by mode.

Ernest Ford — Mon, 12 Jul 2004 20:47:18 GMT

Start by disconnecting the ethernet cable - if the system only turns on by itself when the ethernet cable is connected, check the CMOS setup for Wake-on-LAN and disable it.

Re: With DSL modem, can't go to stand by mode.

Michael_386 — Mon, 12 Jul 2004 23:07:51 GMT

Ok. I unplugged the ethernet cable and I went into standby mode just fine and stayed that way. I plugged the cable back in and the cpu woke up.

How do I change this setting?

Re: With DSL modem, can't go to stand by mode.

Ernest Ford — Tue, 13 Jul 2004 07:42:29 GMT

On a Pavilion - you'd most likely enter CMOS setup by pressing F1 at power on - there should be a message when you get that blue HP logo screen - somewhere in there should be a place to enable/disable Wake-on-LAN.

Does your 2WIRE wireless modem include a firewall/router? The wake-on-LAN feature is a network management tool that would require someone to send a "magic" packet to turn your system on - I'm just wondering if there is a prankster or hacker having some fun with you.

Try leaving the ethernet cable between the DSL modem and the Pavilion connected and disconnect the cable between the DSL modem and the wall outlet and see what happens.

Re: With DSL modem, can't go to stand by mode.

Michael_386 — Tue, 13 Jul 2004 12:17:28 GMT

I didn't unplug the dsl line from the phone jack. I did find a place in device manager in hardware for my ethernet card, that I could uncheck a box that will or will not bring me out of standby if hooked to network.

I can now go to standby normally.

Thank you for your help.

Re: With DSL modem, can't go to stand by mode.

Michael_386 — Tue, 13 Jul 2004 12:19:04 GMT

And my wireless modem is firewalled.