https://community.hpe.com/t5/switches-hubs-and-modems/alert-in-pcm/m-p/3359606#M3449 How does the switch cpu utilization look like? Thu, 19 Aug 2004 20:55:48 GMT Stuart Teo 2004-08-19T20:55:48Z https://community.hpe.com/t5/switches-hubs-and-modems/alert-in-pcm/m-p/3359605#M3448 Hi,<BR /><BR />I encounter also some problem with PCM+<BR />I have the folliwing error message in traffic devices for an 5372xl<BR />On some ports<BR />SNMP error on segment x.x.x.x_port_dxx, state=12, pdutype=162, snmp error =2, error index =2.<BR />and some other ports<BR />Device at address x.x.x.x is not responding to snmp request<BR /><BR />Best regards Wed, 18 Aug 2004 03:30:02 GMT https://community.hpe.com/t5/switches-hubs-and-modems/alert-in-pcm/m-p/3359605#M3448 BP7 2004-08-18T03:30:02Z https://community.hpe.com/t5/switches-hubs-and-modems/alert-in-pcm/m-p/3359606#M3449 How does the switch cpu utilization look like? Thu, 19 Aug 2004 20:55:48 GMT https://community.hpe.com/t5/switches-hubs-and-modems/alert-in-pcm/m-p/3359606#M3449 Stuart Teo 2004-08-19T20:55:48Z