topic Re: HP5130 switch SNMP and local MAC AUTHENTICATION in Switches, Hubs, and Modems

HP5130 switch SNMP and local MAC AUTHENTICATION

Sandy1612 — Thu, 01 Jul 2021 13:03:21 GMT

Hi,
I need help because I have not found the informations in the forum or documentation.
My company uses HP 5130 L2 switches for users access to the network and each interface linked to a terminal device is configured with local mac-authentication like this :

port access vlan yy
mac-authentication
mac-authentication max-user 1
mac-address static xxxx-xxxx-xxxx vlan yy

Which MIB corresponds to local mac-authentication ?
Which OIDs corresponds to these mac-authentication commands ?

Is there a benefits to use the port-secure feature instead of mac-authentication ?

Thank you by advance.

Re: HP5130 switch SNMP and local MAC AUTHENTICATION

akg7 — Sun, 04 Jul 2021 03:57:39 GMT

Re: Query Id: #22022 Hewlett Packard Enterprise (HPE) welcomes your feedback

Hello,

OID valune for local MAC address mapping:
.1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.2

and for mac-authentication:
.1.3.6.1.4.1.11.2.14.11.15.2.26.1.1.4.10

MAC authentication controls network access by authenticating source MAC addresses on a port whereas Port security features combines and extends 802.1X and MAC authentication to provide MAC-based network access control. This feature applies to networks, such as a WLAN, that require different authentication methods for different users on a port.

So I believe mac-authentication is enough for terminal devices.

Thanks!

Re: HP5130 switch SNMP and local MAC AUTHENTICATION

Sandy1612 — Thu, 08 Jul 2021 08:02:43 GMT

Thank you but it seems these oids don't correspond to my equipments.
Snmp get ou snmp walk returns nothing.
My test switch is a 5130 Flexnetwork.