topic Re: HPE 5130 Automatically synchronize the clock with a trusted time source on the network in Switches, Hubs, and Modems

HPE 5130 Automatically synchronize the clock with a trusted time source on the network

moboter — Tue, 17 Aug 2021 11:25:31 GMT

i wanted to the implement this feature

but the problem i am facing is that I receive the attached messageMY Settingserror message

Re: HPE 5130 Automatically synchronize the clock with a trusted time source on the network

Ivan_B — Tue, 17 Aug 2021 08:55:24 GMT

Hi @moboter ,

I am not a big fan of GUI, but I can help you setting up DST in CLI. Which country is the switch in?

Re: HPE 5130 Automatically synchronize the clock with a trusted time source on the network

-Alex- — Tue, 17 Aug 2021 09:06:59 GMT

Hello moboter,

You have to set the first day and time e.g. for EST the daylight time starts on the second Sunday in March, at 2:00 a.m. EST and ends on the first Sunday in November, at 2:00 a.m. EDT.

So you have to enter the first day and time when the summer time starts in "from"and the date and time it ends in "to".

Hope this helps!

Re: HPE 5130 Automatically synchronize the clock with a trusted time source on the network

moboter — Tue, 17 Aug 2021 09:04:58 GMT

Hello Ivan

Location is Germany

Re: HPE 5130 Automatically synchronize the clock with a trusted time source on the network

-Alex- — Tue, 17 Aug 2021 09:11:14 GMT

Hello moboter,

In Gemany it should be "from" on the last Sunday of March 02:00 and "to" the last Sunday of October 03:00. Please double check but I think this is the correct time of the time change.

Hope this helps!

Re: HPE 5130 Automatically synchronize the clock with a trusted time source on the network

Ivan_B — Tue, 17 Aug 2021 09:17:57 GMT

This configuration should work:

system-view clock timezone CET add 01:00:00 clock summer-time CEST repeating 02:00:00 2014 March last Sunday 03:00:00 2014 October last Sunday 01:00:00

Re: HPE 5130 Automatically synchronize the clock with a trusted time source on the network

moboter — Tue, 17 Aug 2021 09:19:52 GMT

Hello Alex that works fine

another issue is that the synchronisation with the NTP Server clock is unsynchronizedunsynchronized

Re: HPE 5130 Automatically synchronize the clock with a trusted time source on the network

moboter — Tue, 17 Aug 2021 09:56:28 GMT

Thank you Ivan

do you also have a cli command to set the ntp server?

Re: HPE 5130 Automatically synchronize the clock with a trusted time source on the network

-Alex- — Tue, 17 Aug 2021 10:28:46 GMT

Hello Moboter,

It usually takes some time to sync so it may sync in few minutes or may try another server e.g. 134.130.5.17. Also you may try to ping the server or any other server to be sure that the traffic from the switch is reaching the internet you should have gateway.

Hope this helps!

Re: HPE 5130 Automatically synchronize the clock with a trusted time source on the network

moboter — Tue, 17 Aug 2021 13:41:27 GMT

Ping from Switch to NTP server is ok

Havent found where the GW can be specified in the gui

so I added a route to the ntp server

Clock status: remains unsynchronized however for a moment it display the correct time in a separate window

Re: HPE 5130 Automatically synchronize the clock with a trusted time source on the network

Ivan_B — Tue, 17 Aug 2021 12:51:35 GMT

Here is the command to configure NTP server:

ntp-service unicast-server <ntp_server_ip_address>

I recommend you to check Network Management and Monitoring Configuration Guide here - https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=a00017778en_us