https://community.hpe.com/t5/switches-hubs-and-modems/acl-problem-using-procurve-5304xl/m-p/3525947#M4942 I have Procurve Switch 5304XL, SW ver. 9.03.<BR />I've discovered some problems when creating ACLs.<BR />I try to do this:<BR /><BR />no ip access-list standard demo<BR />ip access-list standard demo<BR /> permit host 10.0.98.50<BR /> permit 10.0.0.0 0.0.0.255<BR /> deny 10.0.0.0 0.255.255.255<BR /> permit any<BR /> exit<BR /><BR />But the "deny" clause is not accepted and I recieve:<BR />"Duplicate access control entry."<BR /><BR />Do I do something wrong or it's a bug ?<BR /> Fri, 15 Apr 2005 11:50:16 GMT Andrew Knyzev 2005-04-15T11:50:16Z https://community.hpe.com/t5/switches-hubs-and-modems/acl-problem-using-procurve-5304xl/m-p/3525947#M4942 I have Procurve Switch 5304XL, SW ver. 9.03.<BR />I've discovered some problems when creating ACLs.<BR />I try to do this:<BR /><BR />no ip access-list standard demo<BR />ip access-list standard demo<BR /> permit host 10.0.98.50<BR /> permit 10.0.0.0 0.0.0.255<BR /> deny 10.0.0.0 0.255.255.255<BR /> permit any<BR /> exit<BR /><BR />But the "deny" clause is not accepted and I recieve:<BR />"Duplicate access control entry."<BR /><BR />Do I do something wrong or it's a bug ?<BR /> Fri, 15 Apr 2005 11:50:16 GMT https://community.hpe.com/t5/switches-hubs-and-modems/acl-problem-using-procurve-5304xl/m-p/3525947#M4942 Andrew Knyzev 2005-04-15T11:50:16Z https://community.hpe.com/t5/switches-hubs-and-modems/acl-problem-using-procurve-5304xl/m-p/3525948#M4943 I tried copy-paste on a 5300 switch, and I didn't get any errors.<BR />I used a switch with firmware version 09.22<BR />You are using an old firmware, so the problem will probably be gone with a firmware update. Mon, 18 Apr 2005 01:04:32 GMT https://community.hpe.com/t5/switches-hubs-and-modems/acl-problem-using-procurve-5304xl/m-p/3525948#M4943 Kell van Daal 2005-04-18T01:04:32Z