https://community.hpe.com/t5/switches-hubs-and-modems/tacacs-command-authentication/m-p/3775865#M7689 I have basic TACACS+ authentication and login working.<BR /><BR />Does the HP implementation support the command authentication, limiting what commands can be run? As I've not managed to get that aspect working.<BR /><BR />Firmware: H.08.92<BR /> Fri, 21 Apr 2006 14:02:14 GMT Paul Civati 2006-04-21T14:02:14Z https://community.hpe.com/t5/switches-hubs-and-modems/tacacs-command-authentication/m-p/3775865#M7689 I have basic TACACS+ authentication and login working.<BR /><BR />Does the HP implementation support the command authentication, limiting what commands can be run? As I've not managed to get that aspect working.<BR /><BR />Firmware: H.08.92<BR /> Fri, 21 Apr 2006 14:02:14 GMT https://community.hpe.com/t5/switches-hubs-and-modems/tacacs-command-authentication/m-p/3775865#M7689 Paul Civati 2006-04-21T14:02:14Z https://community.hpe.com/t5/switches-hubs-and-modems/tacacs-command-authentication/m-p/3775866#M7690 I believe what you're after is TACACS+ Authorization 'aaa authorization'. The only products in the ProCurve family that support this are the 9300/9400 and the 8100.<BR /><BR /> Thu, 04 May 2006 00:58:21 GMT https://community.hpe.com/t5/switches-hubs-and-modems/tacacs-command-authentication/m-p/3775866#M7690 Matt Hobbs 2006-05-04T00:58:21Z