https://community.hpe.com/t5/switches-hubs-and-modems/2524-ssh-access-by-script/m-p/2982205#M971 Hello,<BR />i tried to access our HP Procurve 2524 and 2512 switches via SSH by script, because i want to transfer the configuration and event-log automated from the switches to my TFTP-server as backup every night.<BR /><BR />SSH and TFTP-upload is running well, when I login and start the transfer manually.<BR /><BR />I tried to use plink, a part of the ssh-client putty, to write a script for automated login and transfer, but, when running the script, i always get the following message:<BR /><BR />FATAL ERROR: Server sent disconnect message:<BR />"Remote command execution not supported."<BR /><BR />Does that mean, that i have to enable something, or is an automated access in general impossible?<BR /><BR />Is there an alternative way to transfer the event-logs and configs automatically? Tue, 27 May 2003 07:20:03 GMT Mirko Kerezovic 2003-05-27T07:20:03Z https://community.hpe.com/t5/switches-hubs-and-modems/2524-ssh-access-by-script/m-p/2982205#M971 Hello,<BR />i tried to access our HP Procurve 2524 and 2512 switches via SSH by script, because i want to transfer the configuration and event-log automated from the switches to my TFTP-server as backup every night.<BR /><BR />SSH and TFTP-upload is running well, when I login and start the transfer manually.<BR /><BR />I tried to use plink, a part of the ssh-client putty, to write a script for automated login and transfer, but, when running the script, i always get the following message:<BR /><BR />FATAL ERROR: Server sent disconnect message:<BR />"Remote command execution not supported."<BR /><BR />Does that mean, that i have to enable something, or is an automated access in general impossible?<BR /><BR />Is there an alternative way to transfer the event-logs and configs automatically? Tue, 27 May 2003 07:20:03 GMT https://community.hpe.com/t5/switches-hubs-and-modems/2524-ssh-access-by-script/m-p/2982205#M971 Mirko Kerezovic 2003-05-27T07:20:03Z https://community.hpe.com/t5/switches-hubs-and-modems/2524-ssh-access-by-script/m-p/2982206#M972 Plink doesn't seem to be supported by Procurve, only ssh and tabacs.<BR />Can't you include your ssh command in a shell script ?<BR />J Tue, 27 May 2003 08:17:42 GMT https://community.hpe.com/t5/switches-hubs-and-modems/2524-ssh-access-by-script/m-p/2982206#M972 Jerome Henry 2003-05-27T08:17:42Z