IP Console Switch not responding!

John_Syrakis — Sun, 03 Dec 2006 11:22:45 GMT

I have been having problems with a 1x1x16 IP Console Switch;

I can use it OK physically, but when I try to either add it from a PC using IP Console Viewer and I specify its IP address, I get a 'switch not found on the network' error -

If the switch was already added in the viewer and I try to manage it, I get a "The Console Switch did not respond within the expected time period."

If I recycle power to the switch, everything comes back to normal, but after a few days I same happens again!

It is also interesting that if I try to add the Console Switch by selecting it as a 3x1x16, Console Viewer says that a reply was received by the specified IP Address, but it was not a 3x1x16 switch -

While at the same time when trying to add it as an 1x1x16, the Console Viewer decides that no console switch was found!

IP Console Viewer: 3.0.0.20
IP Console Switch Firmware: 3.0.11A

Any ideas?
Thanks

Re: IP Console Switch not responding!

Matt Hobbs — Wed, 06 Dec 2006 05:39:15 GMT

You may want to try posting this in the ProLiant forum:

http://forums1.itrc.hp.com/service/forums/categoryhome.do?categoryId=264

By the way have you tried replacing it? Judging by the symptoms it's either a faulty unit, a networking issue, or there is a bug with the product.

topic Re: IP Console Switch not responding! in Switches, Hubs, and Modems

IP Console Switch not responding!

Re: IP Console Switch not responding!