topic Re: How do I enable and Configure Virus Throttling on 5300xl switch in Switches, Hubs, and Modems

How do I enable and Configure Virus Throttling on 5300xl switch

Aji B. Brillantes — Sun, 17 Dec 2006 01:27:08 GMT

Hi can you help me enable and configure Virus Throttling on Procurve 5300xl? Can you give me some sample configurations and how it works? Thanks!

Re: How do I enable and Configure Virus Throttling on 5300xl switch

Matt Hobbs — Sun, 17 Dec 2006 02:44:26 GMT

It's a fairly straight forward feature to setup. The basic commands are:

Global and Per-Port Configuration:
connection-rate-filter sensitivity < low | medium | high | aggressive
filter connection-rate < port-list > < notify-only | throttle | block
show connection-rate-filter < blocked-host >

Unblocking Hosts Per-VLAN:
vlan < vid > connection-rate-filter unblock

I recommend you read the chapter on this topic in the Access Security Guide: ftp://ftp.hp.com/pub/networking/software/6400-5300-4200-3400-Security-Oct2006-59906052.pdf

Re: How do I enable and Configure Virus Throttling on 5300xl switch

Mohieddin Kharnoub — Sun, 17 Dec 2006 02:50:47 GMT

Hi

In the following link you can find the Virus Throttling concept and configuration steps with Examples:

ftp://ftp.hp.com/pub/networking/software/6400-5300-4200-3400-Security-Oct2006-59906052-Chap03.pdf

Good Luck !!!

Re: How do I enable and Configure Virus Throttling on 5300xl switch

Aji B. Brillantes — Sun, 17 Dec 2006 03:59:45 GMT

Thanks for your help now I can start planning howto implement it.